中文

Bagging Film

Breather / Bleeder

Release Film

Peel Ply

Sealant Tape

Infusion Flow Media 

PSAT

Accessories

 

Our technical films including the bagging films and the perforated films. Having the maximum width of 10 meters, these films are very soft and hole free, and can be used for the most common resin systems. The perforation pattern of the release film can be made according user requirement -the porosity can be calibrated.  

PEEL PLY FABRIC is a fabric used for preparing a composite surface, which is removed just prior to secondary bonding, or other consequent surface treatments such as painting etc.. By providing a consistent and reliable bonding surface without any additional chemical or mechanical treatment or process, the better bonding strength and less labour cost could be achieved. Of course actual bond strength depends not only on surface impression but also on other variables such as the adhesive, application method, and processing etc..

All-T produces a wide range of peel ply fabrics - Plain or twill woven Nylon 6 or Nylon 66 or Polyester fabrics, ( with or without tracing yarns) are dyed (optional), scoured, and heat-set. No detectable silicone is permitted by the whole procedure. All products fall within a pH range of 4.0 to 8.0 and have maximum petroleum ether extractable of 0.5%.

The vacuum infusion media nets are made of knitted PE fabrics. They have different porosities which allow various good air and resin flows. The heat set version of this kind fabrics are flatter and easy to handle during layering. We also have the ability to provide the extruded open meshes which give the greatest air and resin flow. 

Having a weight range from 40-700g/m 2 , our breather felts are made from Polyester or Polyamide fiber, which can be used at 200 temperature .

Local made vacuum infusion accessories are also available: spiral pipe , vacuum pipe,  connectors, quick plugs, and more...

Reducing the composites fabrication cost with the Peel Ply and Vacuum Infusion Media Made In China  from All-T Composites Co., Ltd.